Revision Notes MCQ Bank SAQ Bank Study Cards Courses Teachers Blog

Other Reactions of Benzene

A concise revision guide to the remaining reactions of benzene: combustion with a smoky flame, and a reaction map that brings the whole topic together.

Paper 2 and 3
Topic 18: Organic Chemistry III
9CH0/02
1

Before You Start

This page collects the reactions of benzene that are not electrophilic substitutions, then draws the whole topic together in one reaction map.

2

Combustion of Benzene

Benzene is a liquid hydrocarbon that burns in air. The flame is smoky and yellow and deposits soot, unlike the clean flame of a small alkane.

  • The carbon : hydrogen ratio in benzene, C₆H₆, is 1 : 1. In hexane, C₆H₁₄, it is 6 : 14.
  • In air there is not enough oxygen to burn all the carbon quickly. Incomplete combustion leaves unburnt carbon, seen as soot.
  • Complete combustion in excess oxygen: 2C₆H₆ + 15O₂ → 12CO₂ + 6H₂O.
  • The same equation per mole of benzene: C₆H₆ + 7½O₂ → 6CO₂ + 3H₂O.
  • A smoky flame is a quick sign of an aromatic or highly unsaturated compound.

Worked example: balancing the combustion equation

Step 1. One C₆H₆ gives 6CO₂ (six carbons) and 3H₂O (six hydrogens).

Step 2.
Oxygen atoms on the right: 12 + 3 = 15
So 7½ O₂ molecules are needed

Answer. Double everything to remove the half: 2C₆H₆ + 15O₂ → 12CO₂ + 6H₂O.

Benzene is 92.3 % carbon by mass, against 85.7 % for cyclohexane and 83.7 % for hexane. The more carbon, the smokier the flame.

Exam focus: Link the smoky flame to the high proportion of carbon: the carbon : hydrogen ratio is high, so combustion in air is incomplete and carbon is released as soot.

Check your understanding

Check: Substitution or Not?

Decide which reactions of benzene keep the delocalised ring and which destroy it, and account for the atoms in each equation.

3

Substitution, Addition or Oxidation?

Every reaction of benzene on these pages falls into one of a few classes. Sorting them by class is the quickest way to check that a product makes sense.

ReactionClassRing kept?
bromination or chlorination with a catalystelectrophilic substitutionyes
nitration with conc. HNO₃ and H₂SO₄electrophilic substitutionyes
Friedel–Crafts alkylation with a halogenoalkaneelectrophilic substitutionyes
Friedel–Crafts acylation with an acyl chlorideelectrophilic substitutionyes
combustion in airoxidation: the molecule is destroyedno
  • In every electrophilic substitution one hydrogen atom of the ring is replaced and the delocalised system survives.
  • The by-product tells you which: HBr or HCl for halogenation and Friedel–Crafts reactions, H₂O for nitration.
  • The catalyst is regenerated in the last step: H⁺ + AlCl₄⁻ → AlCl₃ + HCl, or H⁺ + HSO₄⁻ → H₂SO₄.

Four reactions, one mechanism. Learn the reagent, the catalyst, the conditions, the electrophile and the product as a set for each.

Check your understanding

Quick Check: By-products and Catalysts

Pick the one accurate statement about each new substitution.

4

Reaction Map

Use the map to revise the whole topic. For each arrow you should be able to give the reagents, the conditions, the type of reaction and a balanced equation.

Reagents and conditionsProductType
O₂, burn in airCO₂ + H₂O, smoky flamecombustion
Br₂ with catalyst AlBr₃ or FeBr₃, room temperaturebromobenzene C₆H₅Br + HBrelectrophilic substitution
conc. HNO₃ + conc. H₂SO₄, about 50 °Cnitrobenzene C₆H₅NO₂ + H₂Oelectrophilic substitution
CH₃CH₂Cl, anhydrous AlCl₃, refluxethylbenzene C₆H₅CH₂CH₃ + HClelectrophilic substitution (alkylation)
CH₃COCl, anhydrous AlCl₃, refluxphenylethanone C₆H₅COCH₃ + HClelectrophilic substitution (acylation)

Five arrows from benzene. Four are electrophilic substitutions that keep the ring; combustion destroys it.

Exam focus: A reaction-map question usually asks for reagents and conditions, then the type of reaction, then a mechanism for one arrow. Name the electrophile every time.

Check your understanding

Check: The Reaction Map

Match reagents, conditions and products across the reactions of benzene, and classify each one.

Check your understanding

Quick Check: New Targets from Benzene

Use the map to plan each new product, then flip the card to compare.

5

Common Exam Points

  • Benzene burns with a smoky flame because of its high carbon : hydrogen ratio; combustion in air is incomplete and gives soot.
  • Balanced combustion: 2C₆H₆ + 15O₂ → 12CO₂ + 6H₂O.
  • Every electrophilic substitution keeps the delocalised ring and replaces one H; the by-product is HBr, HCl or H₂O.
  • State the catalyst and how it is regenerated whenever a question asks for conditions.
  • When asked for a reaction map, give reagents AND conditions for every arrow; one without the other loses the mark.

FAQs

Use these quick answers to check combustion and the reaction map of benzene.

Why does benzene burn with a smoky flame?

Benzene has a very high carbon to hydrogen ratio, six carbons for six hydrogens. In air there is rarely enough oxygen to oxidise all that carbon, so some is left as soot. The flame is yellow and smoky, a sign of an aromatic compound.

What is the equation for the complete combustion of benzene?

2C₆H₆ + 15O₂ → 12CO₂ + 6H₂O, or C₆H₆ + 7½O₂ → 6CO₂ + 3H₂O for one mole. Balance carbon first, then hydrogen, then count the oxygen atoms. Complete combustion needs a plentiful supply of oxygen.

Why does hexane burn cleanly when benzene is smoky?

Hexane, C₆H₁₄, has fourteen hydrogens for six carbons, so its carbon to hydrogen ratio is much lower and the carbon burns away to carbon dioxide. Benzene, C₆H₆, has far more carbon per hydrogen, so unburnt carbon escapes as sooty smoke.

Is the smoky flame a useful test?

Yes, as a quick indication. A smoky yellow flame suggests a compound with a high carbon to hydrogen ratio, such as an aromatic compound. Alkanes and alcohols burn with cleaner flames. It is not conclusive, so confirm with chemical tests.

Which reactions of benzene are substitutions and which are additions?

Nitration, halogenation and Friedel–Crafts reactions are electrophilic substitutions that keep the delocalised ring. Combustion destroys the ring completely. Additions are not seen under ordinary conditions because they would lose the delocalisation energy.

Dr. Mohammed Al-Fatah

Written by:
Dr. Mohammed Al-Fatah

Chemistry specialist revision notes for A Level Chemistry.

View LinkedIn Profile

Copyright notice: This OLS revision content, including the explanations, layout, diagrams, tables and embedded learning structure, is authored for Online Learning System by Dr. Mohammed Al-Fatah. It may not be copied, reproduced, redistributed or adapted without written permission.