Revision Notes MCQ Bank SAQ Bank Study Cards Courses Teachers Blog

Reactions of Metal Ions with Sodium Hydroxide and Ammonia

A concise revision guide to the test-tube reactions of Cu²⁺ and Co²⁺ ions with aqueous sodium hydroxide and aqueous ammonia: observations, ionic equations and what happens in excess.

A Level
Topic 28: Chemistry of transition elements
9701 Paper 4
Cambridge International specification4 spec points in this lesson
  • 28.2.1-b
  • 28.2.1-c
  • 28.2.7-a
  • 28.2.7-b
What these spec points say
  • 28.2.1-b describe and explain the complexes of copper(II) ions with water and ammonia molecules and hydroxide and chloride ions
  • 28.2.1-c describe and explain the complexes of cobalt(II) ions with water and ammonia molecules and hydroxide and chloride ions
  • 28.2.7-a explain qualitatively that ligand exchange can occur, including the complexes of copper(II) ions with water and ammonia molecules and hydroxide and chloride ions
  • 28.2.7-b explain qualitatively that ligand exchange can occur, including the complexes of cobalt(II) ions with water and ammonia molecules and hydroxide and chloride ions

From Aqua Ion to Hydroxide

Choose a step to watch hydroxide ions take protons from the water ligands of a metal aqua ion until a neutral complex precipitates.

Drag to rotate
Step
View

Chromium ion Oxygen Hydrogen Electron pair

© Dr. Mohammed Al-Fatah – onlinelearningsystem.net

1

Before You Start

This page builds on Ligands, Complex Ions and Their Shapes and Ligand exchange and the Stability of Complexes.

What you need to remember

  • A precipitate is an insoluble solid that forms when two solutions are mixed.
  • Aqueous sodium hydroxide gives a blue precipitate with copper(II) ions: this test was met before A Level.
  • In solution a metal ion is an aqua ion, such as [Cu(H₂O)₆]²⁺, with six water ligands.
  • Aqueous ammonia is a weak base: NH₃(aq) + H₂O(l) ⇌ NH₄⁺(aq) + OH⁻(aq).
  • Ammonia is also a ligand: it has a lone pair on the nitrogen atom.
Before you start

GCSE Recap: Testing for Ions

Three quick questions on the GCSE ion tests this page builds on.

2

The Observations

Each test starts with a few drops of the reagent, which is then added until it is in excess.

IonAqua ion and colourA few drops of NaOH(aq) or NH₃(aq)Excess NaOH(aq)Excess NH₃(aq)
Cu²⁺[Cu(H₂O)₆]²⁺: blue solutionpale blue precipitate, Cu(OH)₂(H₂O)₄no further change: precipitate remainsdissolves: deep blue solution, [Cu(NH₃)₄(H₂O)₂]²⁺
Co²⁺[Co(H₂O)₆]²⁺: pink solutionblue precipitate, Co(OH)₂(H₂O)₄; turns pink on standingno further change: precipitate remainsdissolves: yellow-brown solution, which darkens in air, [Co(NH₃)₆]²⁺
  • A few drops of either reagent give the same precipitate: the metal hydroxide.
  • The differences appear only when the reagent is in excess.

Copper(II) ions: a pale blue precipitate with a few drops of either alkali, which dissolves only in excess ammonia to give a deep blue solution.

3

A Few Drops: Precipitation of the Hydroxide

Hydroxide ions remove H⁺ ions from water ligands of the aqua ion. This is an acid–base reaction.

  • Each H⁺ removed lowers the charge of the complex by one.
  • When the charge reaches zero, the neutral complex is insoluble and forms a precipitate.
  • A 2+ ion needs two OH⁻ ions.
  • The oxidation state of the metal and the number of ligands do not change.
IonWith OH⁻(aq)With NH₃(aq)
Cu²⁺[Cu(H₂O)₆]²⁺ + 2OH⁻ → Cu(OH)₂(H₂O)₄ + 2H₂O[Cu(H₂O)₆]²⁺ + 2NH₃ → Cu(OH)₂(H₂O)₄ + 2NH₄⁺
Co²⁺[Co(H₂O)₆]²⁺ + 2OH⁻ → Co(OH)₂(H₂O)₄ + 2H₂O[Co(H₂O)₆]²⁺ + 2NH₃ → Co(OH)₂(H₂O)₄ + 2NH₄⁺
  • Ammonia acts as a base here, not as a ligand: it accepts H⁺ and becomes NH₄⁺.
  • The precipitate is the same with both reagents.
  • The precipitates are often written without the water ligands, for example Cu(OH)₂.

Changes on standing

  • The blue cobalt(II) hydroxide slowly turns pink.

Cobalt(II) ions: a blue precipitate that does not dissolve in excess sodium hydroxide but dissolves in excess ammonia to give a yellow-brown solution.

Check your understanding

Check: Hydroxide Precipitates

Use the idea that the precipitate is the neutral metal hydroxide: count the hydroxide ions needed, write ionic equations and explain why both reagents give the same solid.

4

Excess Ammonia: Ligand Exchange

In excess, ammonia acts as a ligand. Some hydroxide precipitates dissolve because ammonia molecules replace ligands round the metal ion.

IonEquationObservation
Cu²⁺Cu(OH)₂(H₂O)₄ + 4NH₃ → [Cu(NH₃)₄(H₂O)₂]²⁺ + 2H₂O + 2OH⁻pale blue precipitate dissolves: deep blue solution
Co²⁺Co(OH)₂(H₂O)₄ + 6NH₃ → [Co(NH₃)₆]²⁺ + 4H₂O + 2OH⁻blue precipitate dissolves: yellow-brown solution, which darkens in air
  • This is ligand exchange: the complex ion formed is soluble, so the precipitate dissolves.
  • With copper the exchange is incomplete: only four ammonia ligands enter, and two water ligands remain.
  • The cobalt solution darkens in air as [Co(NH₃)₆]²⁺ is oxidised to [Co(NH₃)₆]³⁺.
  • Neither hydroxide dissolves in excess sodium hydroxide: there is no further change.
  • A hydroxide that does dissolve in excess sodium hydroxide, as well as in acid, is called amphoteric.
  • The overall ligand exchange equations are on Ligand exchange and the Stability of Complexes.

With concentrated hydrochloric acid, both aqua ions undergo ligand exchange with chloride ions instead. Those reactions are on Ligand exchange and the Stability of Complexes.

Remember: A few drops of ammonia: it is a base, and the hydroxide precipitates. Excess ammonia: it is a ligand, and some precipitates dissolve as complex ions.

Check your understanding

Check: Excess Sodium Hydroxide and Excess Ammonia

Explain what dissolving in excess shows: amphoteric behaviour with sodium hydroxide, and ligand exchange with ammonia.

5

Using the Tests to Identify Ions

  • Cu²⁺ and Co²⁺ both give blue precipitates. In excess ammonia, copper gives a deep blue solution and cobalt a yellow-brown one.
  • Cu²⁺ is recognised by the deep blue solution in excess ammonia.

Worked example 1

A pink solution gives a blue precipitate with a few drops of sodium hydroxide. The precipitate does not dissolve in excess. Identify the metal ion and write the equation.

Step 1.
The blue precipitate is cobalt(II) hydroxide, Co(OH)₂(H₂O)₄
So the ion is Co²⁺

Step 2. Precipitation: [Co(H₂O)₆]²⁺ + 2OH⁻ → Co(OH)₂(H₂O)₄ + 2H₂O

Step 3.
With excess ammonia: Co(OH)₂(H₂O)₄ + 6NH₃ → [Co(NH₃)₆]²⁺ + 4H₂O + 2OH⁻
The precipitate dissolves to give a yellow-brown solution, which darkens in air
Answer.
The ion is Co²⁺
Its hydroxide dissolves in excess ammonia by ligand exchange, but not in excess sodium hydroxide

Worked example 2: an unfamiliar ion

An ion X³⁺ forms a hydroxide precipitate with aqueous sodium hydroxide. Write the ionic equation.

Step 1.
The precipitate is neutral
So a 3+ ion needs three hydroxide ions

Answer. [X(H₂O)₆]³⁺ + 3OH⁻ → X(OH)₃(H₂O)₃ + 3H₂O

These test-tube reactions are part of practical work: see Practical skills.

Check your understanding

Quick Check: Separating a Mixture of Ions

Use the data in the question to follow each metal through two filtrations.

6

Common Exam Points

Say

  • “A pale blue precipitate forms, which dissolves in excess ammonia to give a deep blue solution.”
  • “The precipitate does not dissolve in excess sodium hydroxide.”
  • “Ammonia acts as a base with a few drops and as a ligand in excess.”

Do not say

  • “The solution turns cloudy” (state the colour and that it is a precipitate).
  • “A blue solution forms” for copper(II) hydroxide (it is a pale blue precipitate).
  • “The precipitate is [Cu(OH)₂(H₂O)₄]²⁺” (the precipitate has no overall charge).

Watch for

  • Observations need a colour and a state: solution or precipitate.
  • An equation for a reaction in excess starts from the hydroxide precipitate.
  • Charges must balance: check the total charge on each side.
  • The cobalt ammonia complex darkens in air because it is oxidised.
Check your understanding

Check: Identifying Ions from Test-Tube Reactions

Interpret described observations with sodium hydroxide and ammonia, write the ionic equations and decide which reagent tells two ions apart.

FAQs

Use these quick answers to check the reactions of aqueous metal ions with sodium hydroxide and ammonia.

What do I see when sodium hydroxide is added to copper(II) ions?

A pale blue precipitate of copper(II) hydroxide forms: [Cu(H₂O)₆]²⁺ + 2OH⁻ → Cu(OH)₂(H₂O)₄ + 2H₂O. The precipitate has no overall charge, which is why it is insoluble. It does not dissolve in excess sodium hydroxide.

Why does a little ammonia give the same precipitate as sodium hydroxide?

A few drops of ammonia act as a base, not as a ligand: [Cu(H₂O)₆]²⁺ + 2NH₃ → Cu(OH)₂(H₂O)₄ + 2NH₄⁺. The same pale blue hydroxide precipitate forms. Only excess ammonia replaces ligands.

Why does the copper(II) hydroxide precipitate dissolve in excess ammonia?

Ammonia molecules act as ligands and form a soluble complex ion by ligand exchange: Cu(OH)₂(H₂O)₄ + 4NH₃ → [Cu(NH₃)₄(H₂O)₂]²⁺ + 2OH⁻ + 2H₂O. The pale blue precipitate dissolves to give a deep blue solution.

What do I see when cobalt(II) ions react with hydroxide ions and with ammonia?

A few drops of either reagent give a blue precipitate, which slowly turns pink. It does not dissolve in excess sodium hydroxide. Excess ammonia gives a yellow-brown solution of [Co(NH₃)₆]²⁺, which darkens in air.

How do I tell copper(II) ions from cobalt(II) ions using ammonia?

A few drops give a pale blue precipitate with copper(II) and a blue precipitate with cobalt(II). In excess ammonia, copper(II) gives a deep blue solution of [Cu(NH₃)₄(H₂O)₂]²⁺, whereas cobalt(II) gives a yellow-brown solution.

Dr. Mohammed Al-Fatah

Written by:
Dr. Mohammed Al-Fatah

Chemistry specialist revision notes for A Level Chemistry.

View LinkedIn Profile

Copyright notice: This OLS revision content, including the explanations, layout, diagrams, tables and embedded learning structure, is authored for Online Learning System by Dr. Mohammed Al-Fatah. It may not be copied, reproduced, redistributed or adapted without written permission.