Catalytic Converters
A concise revision guide to catalytic converters in car exhaust systems, including the pollutants removed, the catalyst metals used, key conversion reactions and why converters work best at high temperatures.
Why Catalytic Converters Are Used
Catalytic converters are fitted to car exhaust systems to reduce harmful emissions released during combustion.
They remove carbon monoxide, CO, nitrogen oxides, NOx, and unburned hydrocarbons from exhaust gases.
These pollutants are converted into less harmful products: carbon dioxide, CO2, nitrogen, N2, and water, H2O.
Key idea: A catalytic converter does not stop combustion pollutants forming in the engine. It reduces the harmful gases after they enter the exhaust system.
Structure of a Catalytic Converter
Inside the converter is a ceramic honeycomb structure. The honeycomb design provides a very large surface area so the exhaust gases can contact the catalyst efficiently.
The ceramic structure is coated with a thin layer of catalyst metals, commonly including platinum, palladium and rhodium.
These metals speed up the reactions that convert harmful exhaust gases into less harmful products. The catalyst itself is not used up in the overall process.
The honeycomb structure gives a large catalyst surface area for exhaust gases to react on as they pass through the converter.
Key Reaction: Carbon Monoxide and Nitrogen Monoxide
One important reaction in a catalytic converter involves carbon monoxide reacting with nitrogen monoxide.
The carbon monoxide is oxidised to carbon dioxide, while nitrogen monoxide is reduced to nitrogen.
Key equation: 2CO + 2NO → 2CO2 + N2
| Reactant | Problem | Product formed |
|---|---|---|
| Carbon monoxide, CO | Toxic gas from incomplete combustion | Carbon dioxide, CO2 |
| Nitrogen monoxide, NO | Nitrogen oxide pollutant from hot engines | Nitrogen, N2 |
Unburned Hydrocarbons in Exhaust Gases
Unburned hydrocarbons can also react with nitrogen oxides inside a catalytic converter.
For example, octane, C8H18, can react with nitrogen monoxide to produce carbon dioxide, nitrogen and water.
Example equation: C8H18 + 25NO → 8CO2 + 12½N2 + 9H2O
Exam focus: When asked about catalytic converters, name both the harmful gases removed and the less harmful products formed. Do not just state that the converter “cleans the exhaust”.
Temperature and Effectiveness
Catalytic converters work best at high temperatures. This is why they are most effective once the engine has warmed up.
At low temperatures, the reactions occur more slowly, so the converter is less effective immediately after a cold start.
As the exhaust system becomes hotter, more pollutant molecules have enough energy to react on the catalyst surface.
| Condition | Effect on converter | Exam conclusion |
|---|---|---|
| Cold engine | Catalyst reactions are slower | More pollutants may leave the exhaust |
| Warm engine | Catalyst reactions are faster and more effective | Pollutants are converted more efficiently |
Check Your Understanding
Use these short activities to check the key ideas on catalytic converters, pollutant removal, catalyst structure and reaction equations.
Master Topic 6A/6B Organic Chemistry and Alkanes for Edexcel A Level Chemistry
Continue from these free revision notes into the full Topic 6A/6B Organic Chemistry and Alkanes course for Edexcel A Level Chemistry Paper 2 (9CH0/02), with guided video teaching, diagnostic MCQ practice, teacher-marked short-answer questions and a specification assignment with a personalised progress report.
Guided video teaching
Learn the chemistry and exam technique through structured video lessons with worked examples and walkthroughs.
Instant MCQ feedback
Auto-marked MCQ quizzes provide immediate diagnostic feedback for every answer choice.
Teacher-marked SAQs
Submit written exam responses and receive chemistry specialist feedback with improvement guidance.
Progress tracking
Identify strengths and weaknesses across the full Topic 6A/6B specification with targeted reporting.
See how the course works
Click play to start the course preview animation.
Some ionic radii are shown.
| Ion | Ionic radius / nm |
|---|---|
| Na+ | 0.102 |
| K+ | 0.138 |
| F− | 0.133 |
| Cl− | 0.180 |
Which compound has the strongest ionic bonding?
Explain why the metallic bonding in magnesium is much stronger than that in sodium.
Catalytic Converter FAQs
These questions cover the main exam points on catalytic converters in car exhaust systems.
What does a catalytic converter do?
A catalytic converter reduces harmful emissions from car exhaust gases by converting carbon monoxide, nitrogen oxides and unburned hydrocarbons into less harmful products.
Which catalyst metals are used in catalytic converters?
Catalytic converters commonly use platinum, palladium and rhodium coated onto a ceramic honeycomb structure.
What are the products formed in a catalytic converter?
The main less harmful products are carbon dioxide, nitrogen and water.
Why do catalytic converters work better when the engine is warm?
They work better at high temperatures because the catalyst reactions occur faster once the engine and exhaust system have warmed up.
Copyright notice: This OLS revision content, including the explanations, layout, diagrams, tables and embedded learning structure, is authored for Online Learning System by Dr. Mohammed Al-Fatah. It may not be copied, reproduced, redistributed or adapted without written permission.